Questions and Answers

Question: Do you supply and deliver to Sydney? (Melbourne, Adelaide, Perth?)

Answer: We supply the metal tile roofing sheets Australia wide and we can deliver your new roofing kit to the construction site or your home for your renovation project. Please contact us or send us your plans for a free quote.

Answer: Yes you can, but you have to follow all the safety rules and procedures, wear the right shoes (soft and no slipery sole), keep off the edge of the roof, and ideally be a qualified and trained roofing installer. The metal tiles are strong, but the wrong walking techniques can damage them. When walking keep your feet in the pans (low parts of the roof profile similar to trim deck roofing) and stay over the roof battens lines at all times.

Answer: The minimum pitch is 6 deg (same as corrugated iron) That means that you can use Stell Tile Sheets where the ordinary (concrete) tiles can not be used. See more specs here.

Answer: The Metal Tile roofing sheets are made of high quality roofing steel, zinc coated for rust protection, painted and polyester coated. See more about metal tiles here.

Answer: The installation process of steel tiles roofing sheets is very similar to the ordinary corrugated iron and does not require any special people. Any metal roofing installer (properly trained and qualified) can install the tin tile sheets. Same tools can be used and same installation techniques can be applied. For more details contact us now.

Question: We have Decrabond (or Decramastic) steel roof tiles. Is your product the same thing?

Answer: Metal Tile roofing sheets are the next generation of steel tile roofing. The Metal Tiles will look very similar when installed and create the great impression of tiles but being developed will have more benefits. The Metal roof tiles are made of strong and long run roofing steel (not short panels like decrabond). They have standard fixing with screws (unlike decramastic tiles that are fixed with nails) and have modern smooth finish with polyester coating for long life time. In the same time a lot of people ordering our Metal tile roofing sheets for re-roofing or extensions when the house has decramastic tiles. Fore more details please contact us.

Question: Do you have other profiles?
Answer: At the moment we offer a terracotta tile profile that looks great and matches a large number of existing concrete and clay tiles. See our profiles here.
Question: How can we get some samples?
Answer: Please send us your details, postal address and we will send you a sample or samples. Click here for contact page.

Question: What colours do you have? Are they colorbond colours?
Answer: We have 6 colours on stock. Most colours are close to the standard colours and look good being put together. Our colours are Black, Grey (charcoal), White (off white), Blue (close to ocean blue), Green (close to wilderness), Red (terracotta red or Tuscany red). We are going to introduce a new colour Brown soon. For more information about the colours see our Colours page here.
Question: How heavy are the Steel tiles?
Answer: The weight of the Steel Tile Roofing Sheets is same as the weight of the ordinary corrugated iron and is about 3.5-4 Kg per 1 sq.m. That is 10 times less then weight of concrete tiles (the weight of those is about 40 Kg per 1 sq.m.) That means that there is no needs for a heavy framework and you can save some money on your roof trusses. Metal Tile roofing sheets will not absorb the water (unlike concrete tiles that can increase their weight with water absorbing and cause cracks in the ceiling and walls). Contact us for a free quote now.
Question: How long are the roofing sheets?
Answer: We have few different size sheets on stock. Please refer to the product page.

FAQ